продажи@procamlock.com
Получить мгновенную расценку
  • ПВХ

    Материал

  • 1/2"-4"

    Размер

  • БСП/NPT/GHT

    Нить

Фитинги для труб из ПВХ

ПВХ труба

PVC pipe is a plastic pipe with good corrosion resistance and mechanical strength. It has the advantages of light weight, high strength and low fluid resistance. It is often used in drainage, sewage, agricultural irrigation and other application scenarios.

  • Превосходные характеристики герметизации
  • Insulation and Heat Insulation Performance
  • Wide Application Range
Получить мгновенную расценку
  • OEM-заказ
  • Быстрая и безопасная логистика

ПВХ труба

PVC pipe is a plastic pipe made of PVC as a raw material through extrusion or injection molding. It has excellent insulation, chemical corrosion resistance, pressure resistance, and mechanical strength, and is widely used in fluid pipe systems.

PVC pipe is very light and easy to carry and install. It is also resistant to acids, alkalis, salts, and most chemical media and is not easily corroded, so it is very suitable for transmitting such media. It has high mechanical strength, so it also has good pressure resistance and impact resistance, which can effectively ensure the safety of the pipe system transmission. PVC pipe also has excellent cost performance, and its raw material and processing costs are relatively low. Therefore, it is widely used in municipal drainage, agricultural irrigation, sewage, and other systems.

Функции

Lightweight and Easy to Carry

PVC pipe is lighter than metal pipe, requiring less effort to carry and transport, and is also very convenient to repair and replace.

Excellent Corrosion Resistance

PVC pipe has a certain resistance to substances such as acids, alkalis and salts, and will not be easily corroded, so it is suitable for pipe systems that transport such substances.

Small Fluid Resistance

The inner wall of the PVC pipe is very smooth, and the resistance and friction encountered by the fluid are small, which can effectively reduce energy consumption and ensure transmission efficiency.

Environmentally Friendly and Recyclable

PVC pipe is very environmentally friendly and can be 100% recycled and reused, which is very consistent with the concept of environmental protection and green development.

Приложения

Топливо и масло

Муфты Camlock незаменимы в топливной и нефтяной промышленности, обеспечивая надежные и герметичные соединения для перекачки нефтепродуктов. Их возможность быстрого соединения/разъединения повышает безопасность и эффективность во время процессов загрузки и разгрузки.

Сельское хозяйство

Еда и напитки

Газ

Характеристики

1/2“-4”

Технические характеристики продукта

Код продуктаLT-47A
ТехнологииExtrusion Molding/Injection Molding
Физическая собственностьTensile Strength: 40–60 MPa
Материал, который мы можем сделатьПВХ
НитьBS21 (BSPT&BSPP), ANSI/ASME B1.20.1 (NPT), DIN2999(R/RP), JIS B O203/2(PT), KS BO221/2(PT) и т. д.
Температура (статическое состояние)Обычный ПВХ: от -15°C (5°F) до 60°C (140°F)
ПоверхностьSmooth Surface/UV Coating/Wear-Resistant Reinforcement Layer
МодельP-085
ФормаРавный

Логистика и сертификация

СертификатISO 9001:2015,IS014001:2015, CE, ROHS, KC и т.д.
УпаковкаПВХ-мешок для каждой детали. Картонные коробки с поддоном/вне поддона/деревянные ящики
ПортНинбо/Шанхай, Китай или другой порт по запросу.
ОбразецПредлагаем бесплатные образцы и сбор груза
Детали доставкиВ соответствии с количеством и спецификациями каждого заказа. Полный запас для обеспечения быстрой доставки небольших заказов. Обычные сроки доставки составляют от 30 до 45 дней после получения депозита.
Общие приложенияНефть и газ, химия, продукты питания и напитки, сельскохозяйственное орошение
Получить мгновенную расценку

Поддерживать

Больше поддержки

Руководство по установке

The first installation method is glue bonding. Apply glue to the connecting port, quickly connect the two parts, and wait for the glue to solidify before completing the installation. The second is a threaded connection, usually a BSP or NPT thread. Rotate and tighten the two parts in the direction of the thread. Add sealant to strengthen the connection and improve the sealing effect. The third is a flange connection. This connection method requires the use of rubber washers and bolts to strengthen the seal. It is usually used in large-diameter pipe systems. Another connection method is quick-insert, which does not require additional tools to assist and can achieve a quick connection.

Послепродажное обслуживание

Часто задаваемые вопросы

Looking for answers about the PVC Pipe? Visit our FAQ section for detailed information and expert insights.

Связаться с нами
  • What working pressure can a PVC pipe withstand?
    Usually, PVC pipe can maintain stable performance in systems with working pressures of 120-230 PSI.
  • Can PVC pipes be used in outdoor environments?
    Yes. However, it is best to use PVC pipes with UV coating and try to avoid long-term direct sunlight to avoid affecting the service life of the pipe.
  • Can it be used to transport hot water?
    Generally speaking, the upper limit of the working temperature range of our PVC pipe is 60℃, so try not to use it in pipe systems that transport hot water.
  • Can PVC pipe be used in drinking water systems?
    Yes, our PVC pipe meets safety standards, is non-toxic and lead-free, and can be used in drinking water pipe systems.
  • What are the common connection methods?
    Common connection methods include threaded connection, glue bonding, flange connection, etc. You can choose the corresponding connection method according to your system requirements.

Недавно просмотренные продукты

Посмотреть больше

Приобретите муфту Camlock сегодня!

PROCAMLOCK предлагает прочные, высокопроизводительные фитинги Camlock для простого использования в таких отраслях, как пищевая промышленность, химическая промышленность и строительство.

Получить мгновенную расценку
Выберите язык [gtranslate]
ru_RUРусский
en_USEnglish arالعربية de_DEDeutsch es_ESEspañol fr_FRFrançais ru_RUРусский